Timber Cut List Optimizer
Pack mixed lengths into standard stock with saw kerf and an offcut schedule.
Project plan
How the calculation works
Enter one part per line as length, quantity in the displayed unit. Each part reserves one saw kerf, including the last cut, except a single exact-length piece taken uncut. The tool compares two decreasing-fit strategies and keeps the one using fewer sticks. Run separate plans for each cross-section.
Worked example
Two 1200 mm and two 800 mm parts with 3 mm kerf fit on two 2400 mm sticks. Even two nominal 1200 mm parts alone cannot fit on one stick with a positive kerf.
Use these quantities for estimating and purchasing. Have structural design, code compliance and project details checked by a qualified professional.